ENERECO SOLUZIONI srl - Energy Solutions -

Italian version

Enereco Information Portal

Go to www.enerecosrl.com

ATs - Advanced Technologies
ENERECO srl has activated a department called ATs for the study, the development and the turn key installation of systems and equipments. The long experience of the “Research and Development” department has allowed the technicians of ENERECO srl to reach important goals both on a national and European scale. Moreover, ENERECO srl has a constant cooperation with the most important Italian and European Universities, with which the company takes part in programmes of research and realization of innovative systems for the following technologies:

- PHOTOVOLTAIC
- WIND
- SOLAR THERMAL
- BIOMASS
- HYDROGEN
- COMPRESSED AIR.

SOME RESEARCH PROJECTS ACTIVATED BY ENERECO SOLUZIONI srl

“AIR-COM” UNIT
The use of compressed air as vehicle for the production of electrical energy. Thanks to special compressed air motors it is possible to develop innovative generating sets. Therefore, the fossil fuel is substituted by compressed air granting the respect of environment, very low management and maintenance costs and easiness of use. The compressed air can be easily stored and produced without using special machines or tanks.

“HYDROTEC” SYSTEMS
The use of hydrogen as vehicle for the production of electrical energy in the FUEL-CELLS. ENERECO srl is studying the development of FUEL CELLS stand-alone systems type PEM and ALKALINE, with the possibility of producing hydrogen on site. Thanks to particular hydrolyzing systems it is possible to separate hydrogen (and oxygen) from water and to store it, already in pressure, in suitable tanks. Oxygen, obtained as “waste”, can be used for other processes such as:
- sewage oxygenation (waste water treatment)
- water quality control (fish-breeding, aquaculture, ext.)
- ext.

“VORTEX” WIND GENERATOR
In those sites at high altitude and with difficult weather conditions (very low temperatures, gusts of wind, sandstorms ext.) the traditional wind generators with horizontal axis show mechanical problems, this is why their use is not suggested. ENERECO srl is studying an innovative system with vertical axis in two sizes, 500 and 750W, properly designed for rural electrification and telecommunications.

“MULE”: CONTROL AND MANAGEMENT SYSTEM FOR HIGH INTEGRATION HYBRID SYSTEMS
MULE unit will concentrate more than 20 years of experience in the sector of stand-alone photovoltaic and hybrid systems: photovoltaic-wind-hydroelectric-fuel cell-endothermic. The control system inserted in MULE will manage the priorities of production of the various generation blocks of the system, doing the electrical back-up in case of necessity. A software properly studied for the applications in the telecommunications field can be added to the unit on request.

Credits | Disclaimer